Bi-alfa Cobalt M42

Bi-alfa Cobalt M42

0
Rated 0 out of 5
0 out of 5 stars (based on 0 reviews)

The bi-alfa cobalt bandsaw blade has HSS-M42 cutting tips. The high wear resistance of the bandsaw blade results from the very hard and evenly distributed carbides in the tooth tips, formed during the hardening and tempering process.

The martensitic structure of the tooth tips and the high cobalt content create excellent heat resistance and toughness reducing wear rates at high sawing speeds. With a high chromium backing, the saw blade can withstand the considerable flexing stresses, tension and blade guide pressure.

  • graphic Free Shipping over $200 New Zealand wide
  • graphic Manufactured
    in New Zealand
    Purchase Direct
  • graphic 100% Safety Only Secure Payments
  • graphic NZ Wide Shipping Only LIVE: Orders Placed Today
Contact Info
Need Help? Speak to our Blade Gurus: +64 09 889 2996Email Us
BULK DISCOUNT SAVE UP TO 15%
QTYDISCOUNT
1-
5+10%
10+15%

Technical Specifications

ItemBi-alfa Cobalt M42
Materials CutBundled Solids, Thin-walled Tubes, Squared Solids, Thick-walled Tubes, Round Solids, Square Tubes.
Cutting Edge StyleVariable
For Use With Saw TypeBandsaws

Bi-alfa Cobalt M42

The bi-alfa cobalt bandsaw blade has HSS-M42 cutting tips. The high wear resistance of the bandsaw blade results from the very hard and evenly distributed carbides in the tooth tips, formed during the hardening and tempering process.

The martensitic structure of the tooth tips and the high cobalt content create excellent heat resistance and toughness reducing wear rates at high sawing speeds. With a high chromium backing, the saw blade can withstand the considerable flexing stresses, tension and blade guide pressure.

What does the Blade Cut?

Profiles

Bundled Solids

Profiles 2

Thin-walled Tubes

Squared Solids

Thick-walled Tubes

Round Solids

Square Tubes

Standard order processing/manufacturing time is around 24-48 hours

All orders placed before 12:00 pm Auckland time go into production on the same day and dispatched the following afternoon.

Please note: Due to high demand and complexity of the production process "Carbide Grit and Diamond Coated blades can take up to 4 weeks to 3 months to ship.

For enquires, please email [email protected] or call 09 889 2996.

  • Delivery policy

    We will arrange for the products to be delivered to the address for delivery indicated in your order. Each item will be subject to “Signed on Receipt”.

    We will use reasonable endeavours to deliver products on the date for delivery set out in our order confirmation or, if no date is set out in our order confirmation, within 7 days of the date of our order confirmation. However, we cannot guarantee delivery by the relevant date.

    We do however guarantee that unless there are exceptional circumstances all deliveries of products will be dispatched within 30 days of the later of receipt of payment and the date of our order confirmation

0
Rated 0 out of 5
0 out of 5 stars (based on 0 reviews)
Excellent0%
Very good0%
Average0%
Poor0%
Terrible0%

Write a Review

There are no reviews yet. Be the first one to write one.

Purchase Your Blade

1. Select the width you require

3. Select the Length (Round up to the Closest Increment)(Round up to the Closest Increment)

2. Now Enter the Exact Length in (mm) (Made to your Order)

Length is not correct, changed to maximum allow length.

Adjust the wheels of the machine to their correct position (about the middle of the adjustment range)

  • Refering to the diagram below, measure the distance between the centre point of each wheel in mm (measurement D).
  • Now measure the radius of each wheel in mm (R1 and R2).
  • Use this formula to calculate the band length

Video on how to select the Length

3. Select the TPI (Teeth Per Inch)

The number of teeth per inch (TPI) defines the pitch of the blade and can vary from 1 to 32 tpi.

On some blades there are different pitches on the same blade. You must select the correct tpi for the thickness of material you are cutting. If the corrrect tpi is not chosen the blade life will be dramatically shortened.

The general rule of thumb is: For wood and soft materials aim ffor 3-6 teeth in the work piece.

The number of teeth per inch (TPI) defines the pitch of the blade.

On some blades there are different pitches on the same blade. You must select the correct tpi for the thickness of material you are cutting. If the corrrect tpi is not chosen the blade life will be dramatically shortened.

Please use the following guide to select the correct tooth selection.









4. Can I have your Name?

5. and your Contact Number?

6. Enter Quantity

    Order Your Blade

    Order Details:

    Complete Purchase
    Complete Purchase

    Showing 1–12 of 86 results

    Partners

    Not sure what you need?

    Don’t worry – get in touch with the team and we will help you find the right product for your requirements

    Request A Quote
    Shopping Cart
    Your Cart is Empty
    Let's start shopping!
    Shop Bandsaw Blades Online!
    0